Iindaba zeNkampani

Indlela yokuphucula ubomi benkonzo yesikhunta

Kubasebenzisi, ukwandisa ubomi benkonzo yesikhunta kunokunciphisa kakhulu ixabiso lesitampu.Izinto ezichaphazela ubomi benkonzo yesikhunta zezi zilandelayo:

1. Uhlobo lwezinto eziphathekayo kunye nobukhulu;

2. Ingaba ukhetha isithuba sokungunda esifanelekileyo;

3. Ubume bomngundo;

4. Ingaba izinto eziphathekayo zinokuthambisa okulungileyo ngexesha lesitampu;

5. Ingaba ukungunda kuye kwaphathwa ngendlela ekhethekileyo;

6. Njenge-titanium plating, i-titanium carbonitride;

7. Lungelelanisa ii-turrets eziphezulu nezisezantsi;

8. Ukusetyenziswa ngokufanelekileyo kwe-gaskets yokulungelelanisa;

9. Ingaba i-oblique blade mold isetyenziswe ngokuchanekileyo;

10. Ingaba isiseko sokubumba sesixhobo somatshini sigugile okanye cha;

Ukusila ngundo

1. Ukubaluleka kokusila ngundo

Ukucolwa rhoqo kwesikhunta kuqinisekisa umgangatho wokunyathela ohambelanayo.Ukugaya rhoqo isikhunta akukwazi nje ukwandisa ubomi benkonzo yesikhunta, kodwa nokwandisa ubomi benkonzo yesixhobo somatshini.Kufuneka ubambe ixesha elifanelekileyo lokulola imela.

2. Iimpawu ezithile zokubumba kufuneka zilolwe

Ukulolwa komngundo, akukho nani lingqongqo lemivumbo yehamile ukumisela ukuba ukulolwa kuyafuneka.Oku ikakhulu kuxhomekeke kubukhali beblade.Imiselwa ikakhulu zezi zinto zintathu zilandelayo:

(1) Khangela i-fillet yomgca wokusika.Ukuba i-radius ye-fillet ifikelela kwi-R0.1mm (ixabiso eliphezulu le-R alikwazi ukudlula i-0.25 mm), ukulolwa kuyadingeka.

(2) Jonga umgangatho wesitampu.Ngaba zikhona iibhula ezinkulu?

(3) Qinisekisa ukuba ukulola kuyafuneka ngokwengxolo yokubethwa koomatshini.Ukuba izibini ezifanayo zokubumba zinengxolo engaqhelekanga ngexesha lokubetha, oko kuthetha ukuba iipuntshi zibuthuntu kwaye zifuna ukulolwa.

Qaphela: Umphetho we-blade ujikelezwe okanye umva we-blade urhabaxa.Ukulola kufuneka kuqwalaselwe.

3. Indlela yokulola

Zininzi iindlela zokulola umngundo.Oku kunokufezekiswa nge-sharpener ekhethekileyo okanye kwi-grinder yomhlaba.Amaxesha okulolwa kwe punch kunye nokufa ngokubanzi yi 4:1.Nceda ulungise ubude bomngundo emva kokulola imela.

(1) Iingozi zeendlela zokulola ezingachanekanga: ukulolwa okungalunganga kuya kwandisa umonakalo okhawulezayo we-blade yokubumba, okukhokelela ekunciphiseni kakhulu inani lemivimbo yesando ngokulolwa.

(2) Iingenelo zendlela echanekileyo yokulola: Ukulolwa rhoqo kwesikhunta kunokugcina umgangatho wokubethelwa kunye nokuchaneka kuzinzile.I-blade ye-mold yonakaliswa ngokukhawuleza kwaye inobomi obude benkonzo.

4. Imithetho yokulola

Ezi zinto zilandelayo kufuneka ziqwalaselwe xa kusila ukungunda:

(1) Kwimeko ye-R0.1-0.25 mm, ubukhali be-fillet ye-cut cut kuxhomekeke kubukhali becala lokusika.

(2) Umphezulu wevili lokusila ufanele ucocwe.

(3) Kucetyiswa ukuba usebenzise ivili lokusila elithambileyo elirhabaxa.Njenge WA46KV

(4) Isixa sokusila (isixhobo) akufanele sidlule kwi-0.013 mm ngexesha ngalinye.Ukugaya ngokugqithiseleyo kuya kubangela ukuba i-mold surface igqithise, elingana nonyango lwe-annealing, i-mold iyancipha, kwaye ubomi bobumba buyancipha kakhulu.

(5) Kufuneka kongezwe isisipholisi esaneleyo xa kusila.

6

(7) Umthamo wokugaya umngundo uhlala uhleli.Ukuba eli xabiso lifikelelwe, i-punch iya kuchithwa.Ukuba uqhubeka ukuyisebenzisa, kulula ukulimaza isikhunta kunye nomatshini.

8

(9) Emva kokulola, coca, demagnetize kunye ne-oyile.